Revolabs Fusion Microphone System — Sony PCS-G50 User Manual

Page 2

Advertising
background image

Connecting the Cables

1. Connect a Female XLR – 1/8” audio cable between the XLR “CONF OUT” port on

the Fusion and the “MIC 1” port on the PCS-G50.

2. Connect a Male RCA-RCA audio cable between the “CONF IN” port on the

Fusion and the non-mixed “AUDIO OUT” port on the PCS-G50.

3. Connect a Male RCA audio cable between the “Room Out” port on the Fusion

and the Amplified Speakers.

3

1

2

NOTE: You must use your Fusion remote control to control the room volume

for both the audio and video conference calls. Adjusting the volume in the
video codec will cause echo.

1

2

Advertising
See also other documents in the category Revolabs Equipment: