Revolabs Fusion Microphone System - Tandberg 6000 / 8000 MXP - Manual (Page 2)

Connecting the Cables
C ONNECTING A REVOLABS FUSION TO T ANDBERG 6000 / 8000 MXP VIDEO CODEC
1. Connect a Male RCA-RCA audio cable between the “Conf. In” port on the Fusion
and the “VCR 1” port on the 6000 / 8000 MXP.
2. Connect a Male XLR audio cable between the “Mic Conf. Out” port on the Fusion
and the “Mic 1” port on the 6000 / 8000 MXP.
3. Connect a Male RCA audio cable between the “Room Out” port on the Fusion and
the Speakers.
Note: The speakers used for audio and video conferencing with
this configuration must be connected to the Fusion for proper
echo cancelation.