Revolabs XTAG USB - Manual (Page 4)

-3 -
European Compliance
This equipment has been approved in accordance with Council Directive
1999/5/EC “Radio Equipment and telecommunications Equipment.”
Conformity of the Equipment with the guidelines below is attested by the
CE mark.
Model Numbers:
04-DSKCHGEU-D Revolabs xTag™ Charger
04-DSKMIEU-D Revolabs xTag™ Microphone
Standards to which Conformity is declared:
RF ETSI EN 301 406 V 1.4.1 03/2001
EMC ETSI EN 301 489-6 v1.2.1 (2002-04)
WEEE Notification:
The Waste Electrical and Electronic Equipment (WEEE) directive
(2002/96/EC) is intended to promote recycling of electrical and
electronic equipment and their components at end of life.
2003/11/EC & 2002/95/EC “RoHS Compliance Directive”:
The products referenced herein are in compliance with the EU
directive 2003/11/EC and EU directive 2002/95/EC.
-4 -
Introduction Introduction Introduction Introduction
Congratulations on the purchase of your Revolabs
xTag™ USB wireless microphone system! This wireless
system provides high band-width audio from a
compact wireless microphone enabling reliable, secure,
and untethered personal communication.
The xTag Wireless Microphone System is a unique
marriage of innovative technology and ergonomic
stylish design, featuring 1.9 GHz DECT technology.
This product enhances audio communication in both
personal and enterprise applications, using Multi-
Carrier, Time Division Multiple Access and Time
Division Duplex (MC/TDMA/TDD) radio transmissions
both to and from the microphone.
This means that the system can co-exist with other
wireless products such as wireless LANs (802.11 b&g)
and cellular phones.
Note: It is recommended that no more than 3 xTag
Systems be used in the same room to avoid
interference.