AT&T DECT 6.0 EL52100 - Manual (Page 32)

27
Telephone operation
If you misplace the handset, use the handset locator feature on the
telephone base to find it.
To start the paging tone:
Press HANDSET LOCATOR on the telephone base
to start the paging tone on the handset for 60
seconds.
To stop the paging tone:
Press PHONE/
FLASH
, SPEAKER, or any dial pad
key (0-9, , or #) on the handset.
-OR-
Press
HANDSET LOCATOR on the telephone base.
-OR-
Put the handset in the telephone base.
NOTES:
If the handset is accessing the answering system, on a call or
out of range, it does not beep when paged.
You cannot use the handset locator feature while the telephone base is playing messages or
the answering system is being accessed remotely.
•
•
•
•
•
•
Handset locator