AT&T DECT 6.0 EL52100 - Manual (Page 38)

33
Directory
Speed dial locations
To assign or reassign a directory entry to a speed dial location
Press MENU/
SELECT
in idle mode.
Press
DIR
or
CID
to scroll to >DIRECTORY. Press
MENU
/SELECT.
Press
DIR
or
CID
to scroll to >SPEED DIAL. Press
MENU
/SELECT.
To assign a speed dial location, press
DIR
or
CID
to
scroll to an empty speed dial location.
-OR-
To reassign a speed dial location, press
DIR
or
CID
to
scroll to the desired speed dial location.
Press
MENU
/SELECT to show the directory.
Press
DIR
or
CID
to browse through the directory and
find the desired entry.
-OR-
Use the alphabetical search to find the desired entry.
Refer to Steps 2 and 3 in
To search by name on page 31.
Press
MENU
/SELECT to confirm. The name (up to 12
characters) of the desired directory entry appears in the
selected speed dial location.
NOTES:
If the directory is empty, when you press
MENU
/SELECT in Step 5, the screen shows
DIRECTORY EMPTY.
If the speed dial location you selected is occupied, the new directory entry you selected
replaces the old one. Take caution not to replace entries you do not wish to delete from the
speed dial locations.
To clear a speed dial location
Follow Steps 1 through 3 in To assign or reassign a
directory entry to a speed dial location on this page to
enter the speed dial list.
Press
DIR
or
CID
to scroll to a speed dial location.
Press DELETE to clear the selected speed dial location.
<EMPTY> appears in that speed dial location.
NOTE: Clearing the speed dial locations does not affect the entries in
the directory.
1.
2.
3.
4.
5.
6.
7.
•
•
1.
2.
3.
>SPEED DIAL
REVIEW
>0: <EMPTY>
1: Robert Brown
Charlie Johnson
888-883-2445
>0: Charlie John
1: Robert Brown
Charlie John
UNASSIGN?
>0: <EMPTY>
1: Robert Brown