Handset display screen messages – AT&T DECT 6.0 EL52100 User Manual

Page 58

Advertising
background image

53

Appendix

CALL LOG EMPTY

You are accessing an empty caller ID history.

DIRECTORY EMPTY

There are no directory entries.

DIRECTORY FULL

The directory is full. You cannot save any new entries unless
you delete some current entries.

ENDED

You have just ended a call.

INCOMING CALL

There is a call coming in.

LINE IN USE

An extension telephone on the same line or the handset is
in use.

LOW BATTERY

The battery needs to be charged.

MICROPHONE ON

Mute is off so the other party can hear your voice.

MUTED

The microphone is off.

NEW VOICEMAIL

There are new voicemail messages from your telephone
service provider.

NO BATTERY

You have placed the handset in the telephone base without
installing a battery in that handset.

NO LINE

There is no telephone line connected.

NO MESSAGE

There are no messages in the answering system.

NOT AVAILABLE

AT THIS TIME

Someone else is already using the answering system on the
telephone base.

NUMBER

ALREADY SAVED

The telephone number you have entered is already stored in
the directory.

OUT OF RANGE OR

NO PWR AT BASE

The handset has lost communication with the telephone base.

PAGING

The telephone base is paging the handset.

PHONE

The handset is on a call.

PLACE IN

CHARGER

The battery is very low. The handset should be placed in the
telephone base.

REC MEM FULL

The answering system memory is full.

RINGER MUTED

The ringer is muted temporarily during an incoming call.

SAVED

The entry is now in the directory.

SPEAKER

The handset speakerphone is in use.

UNABLE TO CALL.

TRY AGAIN

While the handset is on a call, it is out of range or there is
no power at the telephone base.

Handset display screen messages

Advertising
This manual is related to the following products: