Using the burst feature – Kodak Z5010 User Manual
Page 22
14
www.kodak.com/go/support
Taking pictures/videos
Using the Burst feature
1 Press the Self-timer/Burst button until the burst icon
is displayed on the LCD.
2 Press the Shutter button halfway to focus and set exposure, then press and
hold it completely down to take the pictures.
The camera stops taking pictures when you release the Shutter button, when the
pictures are taken, or when there is no more storage space. The flash is disabled in Burst
mode. During quickview, you can delete all pictures in the burst series.
Example: When the camera is in Smart Capture mode and the Picture Size is set to
10 MP, you can take approximately 10 pictures at 0.9 fps (frames per second).
Capture mode
Picture Size (MP)
Burst rate (fps)
Burst depth (pictures)
Smart Capture
14
0.8
8
12
0.8
9
10
0.9
10
6
0.9
17
3
1.0
31
P or M
14
0.9
8
12
1.0
9
10
1.0
10
6
1.0
17
3
1.0
31
Press the Self-timer/Burst button
repeatedly to scroll through Self-timer/Burst
modes.
The burst mode appears on the LCD.