Care and maintenance, Upgrading your software and firmware, The lens – Kodak Z5010 User Manual
Page 58
50
www.kodak.com/go/support
Appendix
Speaker—Mono
PICTBRIDGE support—Yes
Power—(4) AA alkaline or Ni-MH rechargeable batteries; 5V 1.5A DC required if an
AC adapter is used
Tripod mount—1/4 inch
Size—117.7 x 80.8 x 78.7 mm (4.6 x 3.2 x 3.1 in.) @ power off
Weight—Camera, alkaline batteries, and SD card: 473g (16.7 oz)
Camera, Ni-MH batteries, and SD card: 493g (17.4 oz)
Operating temperature—0–40
°
C (32–104
°
F)
Care and maintenance
■
If you suspect water has gotten inside the camera, remove the batteries and card.
Allow all components to air-dry for at least 24 hours before using the camera.
■
Blow gently on the lens or LCD to remove dust and dirt. Wipe gently with a soft,
lint-free cloth or an untreated lens-cleaning tissue. Do not use cleaning solutions
unless designed specifically for camera lenses. Do not allow chemicals, such as
suntan lotion, to contact painted surfaces.
■
Service agreements may be available in your country. Contact a dealer of KODAK
Products for more information.
■
For digital camera disposal or recycling information, contact your local authorities.
In the US, go to the Electronics Industry Alliance site at
or go to
Upgrading your software and firmware
We occasionally update KODAK Software and firmware (the software that runs on the
camera). For instructions on installing the latest version, go to