Kodak Z5010 - Manual (Page 51)

www.kodak.com/go/support 43
7
Troubleshooting
Camera problems
Status Solution
Camera does not
turn on, off; buttons do
not function ■ Remove then reinsert batteries.
■ Replace non-rechargeable alkaline batteries. Charge rechargeable
batteries
( see page 1 ).
Camera freezes up
when a card is inserted
or removed. ■ Turn the camera off, then back on. Make sure the camera is
turned off before inserting or removing a card. For compatible
card types, see
page 4 .
LCD is too dark. ■ Adjust the LCD Brightness setting ( see page 37 ).
In Review, a blue or
black screen is
displayed instead of
a picture ■ Transfer the picture to the computer ( see page 40 ), then format
the card or internal memory.
Caution: Formatting a card deletes all pictures and
videos.
■ Take another picture.
In Review, you do not
see a picture (or the
expected picture) on
the LCD ■ Format the card in the camera ( see page 39 )
Caution: Formatting a card deletes all pictures and
videos.
Pictures remaining
number does not
decrease after taking a
picture ■ Continue taking pictures. The camera is operating normally.
(The camera estimates the number of pictures remaining after each
picture is taken, based on picture size and content.)
Camera displays a
High Temperature
error ■ If camera temperature rises to a certain level, a high temperature
error (Video recording will stop in 5 seconds) appears. Turn the
camera off as soon as possible and let it cool down. The camera
cannot capture more videos until it has cooled down. (Captured
videos are not lost.)