Setting the date and time – Kodak LS443 User Manual
Page 20
8
Chapter 1
Setting the Date and Time
The Date & Time screen is displayed the first time you turn on the camera or if
the battery is removed for more than 10 minutes. If this is the first time the
camera has been turned on, go to Step 3.
To set the date and time after that:
1
Turn on the camera, then press the Menu
button.
2
Move the joystick
to highlight Setup,
then press the OK button.
3
Move the joystick
to highlight Date
& Time, then press the OK button.
The date format is YYYY/MM/DD. The time
is displayed in a 24-hour format.
4
Move the joystick
to adjust the date
and time. Move the joystick
to
advance to the next setting.
5
When finished, press the OK button.
6
Press the Menu button to exit the menu.
The setting remains until you change it.
NOTE: Depending on your computer operating system, KODAK EASYSHARE
Software may allow your computer to automatically update the camera
clock when you connect the camera. See the KODAK EASYSHARE
Software Help for details.
Menu
Joystick/OK