Kodak LS443 - Manual (Page 68)

56
Chapter 6
Changing the Print Quantity Default
The Default Print Quantity setting determines the value that is displayed on the
Share Print screen (
page 52 ). The default value is 1.
1 Press the Menu button.
2 Move the joystick to highlight Setup , then press the OK button.
3 Move the joystick to highlight Default Print Quantity , then
press the OK button.
4 Move the joystick to select the new
default quantity, then press the OK button.
5 Press the Menu button to exit the menu.
This setting remains until you change it.
Turning Off Quickview
After you take a picture or video, Quickview displays it on the LCD for
approximately 5 seconds (see
page 19 and page 38 ). To save battery power,
turn off Quickview.
1 Press the Menu button.
2 Move the joystick to highlight Setup , then press the OK button.
3 Move the joystick to highlight Quickview , then press the OK button.
4 Move the joystick to highlight Off, then press
the OK button.
5 Press the Menu button to exit the menu.
The picture is not displayed on the LCD
after you take it. To see the picture or
video, press the Review button. This
setting remains until you change it.