Connecting the camera dock – Kodak LS443 User Manual
Page 80
68
Chapter 8
Connecting the Camera Dock
After the KODAK EASYSHARE Software is loaded (see
), connect the
Camera Dock to your computer and to an external power source. You need:
m
The USB cable included with your camera
m
The AC power adapter, 5V included with the Camera Dock
IMPORTANT: Make sure your camera is NOT in the Camera Dock
when you are connecting to power and the computer.
1
Plug the labeled
end of the USB cable
into the labeled USB port on your computer.
See your computer User’s Guide for details.
2
Plug the other end of the USB cable into the
square USB connector on the back of the
Camera Dock.
3
Plug the 5V AC adapter into the round
power connector on the back of the Camera
Dock and into a power outlet.
IMPORTANT: Use only the 5V AC adapter included with the Camera
Dock. Other adapters may cause damage to your
camera, Camera Dock, or computer.