Setting the orientation sensor, Other features, Setting the orientation sensor other features – Kodak LS443 User Manual
Page 48
36
Chapter 2
Setting the Orientation Sensor
If you rotate the camera to take a picture (for example, a portrait shot), the
Orientation Sensor reorients the picture so that it is displayed correct side up.
The Orientation Sensor is turned on as the default. You can turn it off so that
pictures are displayed in their original orientation.
NOTE: When your subject is above or below you (such as pictures of an object
in the sky, on the ground, or when pointing down at small objects on a
table), turn off the Orientation Sensor so that pictures are not
rotated unnecessarily.
1
In any Still mode, press the Menu button.
2
Move the joystick
to highlight Orientation Sensor
, then press
the OK button.
3
Move the joystick
to highlight On or
Off, then press the OK button.
4
Press the Menu button to exit the menu.
This setting remains until you change it.
Other Features
m
Choosing Internal Memory or MMC/SD Card, page 11
m
m