Turning on slide show loop, Displaying pictures and videos on a television – Kodak LS443 User Manual
Page 59
47
Chapter 4
Turning On Slide Show Loop
When you turn on Loop, the slide show is continuously repeated.
1
On the Slide Show menu, move the joystick
to highlight Loop, then press the OK
button.
2
Move the joystick
to highlight On,
then press the OK button.
When you start a slide show, it repeats
until you cancel it by pressing the OK
button or until battery power is
exhausted. The Loop setting remains until
you change it.
Displaying Pictures and Videos on a Television
You can display pictures and videos on a television, computer monitor, or any
device equipped with a video input. (Images may not look as good on a
television as on a computer monitor or when printed.)
NOTE: Ensure that the Video Out setting is correctly set to NTSC or PAL
(
1
Connect the audio/video cable from the
camera video-out port to the television
video-in port. (Refer to your television
User’s Guide for details.)
The camera LCD turns off; the television
screen acts as the camera display.
2
Review pictures and videos on the television
screen.
NOTE: If you connect or disconnect the audio/video cable while a slide show is
running, the slide show stops.
Video
out