Upgrading your software and firmware, Additional care and maintenance, The lens – Kodak 4 MP User Manual
Page 101
Appendix
www.kodak.com/go/support
94
■
for:
Kodak 5-volt AC adapter—powers your camera.
Kodak EasyShare camera dock series 3—powers your camera, transfers
pictures and videos to your computer, and charges the Li-Ion battery included with
your camera.
Kodak EasyShare printer dock (series 3 models)—powers your camera,
makes 4 x 6 in. (10 x 15 cm) prints with or without a computer, transfers pictures
and videos to your computer, and charges the included Li-Ion battery.
IMPORTANT: Do not use the AC adapter included with the Kodak EasyShare camera dock
or printer dock to power your camera.
Upgrading your software and firmware
Download the latest versions of the software included on the Kodak EasyShare
software CD and the camera firmware (the software that runs on the camera). See
.
Additional care and maintenance
■
If the camera has been subjected to inclement weather or you suspect water has
gotten inside the camera, turn off the camera and remove the batteries and card.
Allow all components to air-dry for at least 24 hours before using the camera
again.
■
Blow gently on the lens or screen to remove dust and dirt. Wipe gently with a soft,
lint-free cloth or an untreated lens-cleaning tissue. Do not use cleaning solutions
unless designed specifically for camera lenses. Do not allow chemicals, such as
suntan lotion, to contact painted surfaces.
■
Service agreements may be available in your country. Contact a dealer of Kodak
products for more information.
■
For digital camera disposal or recycling information, contact your local authorities.
In the US, visit the Electronics Industry Alliance Web site at
the
Kodak Web
.