Kodak 4 MP - Manual (Page 51)

Using your camera with a Wi-Fi wireless network
www.kodak.com/go/support 44
Connecting to a Wi-Fi wireless network
Once connected to a Wi-Fi wireless network, you can use the wireless capabilities of
your camera.
NOTE: The range of a typical Wi-Fi wireless network can vary between 100 to 300 ft (30 to 90 m),
depending on signal obstructions or other interference. Make sure you are in the vicinity of the Wi-Fi
wireless network you want to connect to.
1 Slide the Capture/View switch to View .
2 Insert a Kodak Wi-Fi
®
card (may be sold separately) into the camera (see
page 43 ).
3 Deploy the Wi-Fi card (see page 43 ).
If the card is already in the deployed position, you can re-scan for available
networks by:
– Touching the Wireless icon, , located on the bottom toolbar.
– Pressing the Menu button, selecting Setup, then selecting Available Networks
under the Wireless menu.
– Redeploying the Wi-Fi card by retracting, then deploying the card (see
page 43 ).
The wireless network status light (next to the Wi-Fi card slot) blinks amber as the
camera scans for available networks.