Kodak 4 MP - Manual (Page 87)

Troubleshooting
www.kodak.com/go/support 80
Printing
Problem Cause and/or solution
Printing does not start ■ The printer power is off.
■ Printer is busy printing or is engaged in another session.
■ Printer has a full buffer.
■ Printer is in an error state. Correct the error.
■ The printer, camera, or computer (if using one) are not connected
to the network or are on different networks.
■ The IP address setting on the camera or printer is incorrect.
Change the IP address or set to Dynamic IP.
■ There is a problem with the network (see page 77 ).
Camera prints to the
wrong printer ■ The selected printer has the same name as the intended one, and
is on the same network.
Print is not complete ■ The printer was disconnected from the network in mid-print.