Lenovo System Update Solution (Deployment Guide) - Manual (Page 30)

Table 11. User Settings\Scheduler (continued)
Configurable
item
Description Value Action
Note: If you use
’Recommended’ in the
search mode,
’NOTIFY’ is the only
option available. All
other settings will
stop the execution of
System Update.
If the setting is NOTIFY the
scheduler will search for new
updates and notify the end user
when new updates are available
for download and installation.
Note:
For
DOWNLOADANDINSTALL,
ensure no spaces separate the
value.
When the
DOWNLOADANDINSTALL
-INCLUDEREBOOT setting is
used, System Update will
download and install update
packages and then prompt you
to restart your system.
Frequency The interval in
which the
scheduler is
set to run:
Weekly or
Monthly. Default value:
MONTHLY This setting along with the
SchedulerRunEvery are used to
set how often System Update
must be run. If the value of this
setting is "WEEKLY
″, the
interval will be calculated in
weeks. If the value of this
setting is
″MONTHLY″, the
interval will be calculated in
months.
Possible values:
v MONTHLY
v WEEKLY
RunOn The specific
day when the
System Update
scheduler
must run. Default value: 1 When the scheduled time has
been reached, System Update
runs on the specified day. When
the frequency is Weekly, the
possible values for this setting
are: SUNDAY, MONDAY,...
SATURDAY. When the
frequency is Monthly, the
possible values for this setting
are from 1 to 28.
Possible values: 1 to
28
RunAt The specific
time when the
System Update
scheduler
must run. This
value is
specified in
hourly
intervals. Default value: 11 When the scheduled time has
been reached, System Update
runs on the specified time.
Possible values: Any
number from 0 to 23
(0 indicates 12AM and
23 indicates 11PM)
Example:
\SCHEDULER\
\SchedulerAbility = NO
\SchedulerLock = SHOW
\SearchMode = CRITICAL
\NotifyOptions = NOTIFY
\Frequency = WEEKLY
\RunOn = MONDAY
\RunAt = 12
24 System Update Solution Deployment Guide