Lenovo System Update Solution (Deployment Guide) - Manual (Page 88)

app id: TVSUAPPLICATION
user: temp
pwd: password
This command captures the encrypted user name and password to setup the
repository with UNC path with authentication.
Storing network share information for a TVT
This function stores the network share information in the registry using the <tvt>
to define the subkey from the main MapDrv registry key:
mapdrv /store <app id> /unc <sharename> /user <username> /pwd <password>
[/timeout <seconds>]
This sets the UNC, user name and password values in the registry.
Connecting to the network share for a TVT
Connect the network share for the specified TVT:
mapdrv /connect <app id> [ /s]
Connects to the share using the UNC, user name , and password values in the
registry. The actual connection UNC is output to the NetPath value.
Disconnecting the network share for a TVT
The following command disconnects the network share for the specified TVT if
currently connected:
mapdrv /disconnect <app id>
Performs a net use /d [NetPath stored in registry] to disconnect the network
connection.
82 System Update Solution Deployment Guide