Lenovo System Update Solution (Deployment Guide) - Manual (Page 38)

Table 12. Computer Configuration>Administrative Templates>ThinkVantage>System
Update>User Settings (continued)
Policy Setting Description
NotifyInterval If this value is set at the default of 300 seconds,
then you are prompted with a restart notification
every 300 seconds when you begin to download
and install a package that forces a reboot and
defer the download and installation process.
System Update uses the default value when
invalid settings are used. For example, if you set
the value to anything over 86,400 seconds (24
hours), System Update uses the default value of
300 seconds. You can change the time interval
value from 60 seconds up to 86,400 seconds (24
hours).
Scheduler Scheduler Ability Turns the System Update scheduler on or off:
v YES sets System Update to run on the
schedule specified.
v NO sets System Update to not run on a
schedule.
Scheduler Lock Determines whether the ’Schedule updates’
option is available in the System Update user
interface:
v SHOW makes the item visible and active.
v HIDE removes the item from the interface.
v DISABLE makes the item visible, but disables
it (the item is greyed-out).
Scheduled Mode Determines the type of packages on which
System Update takes action:
v When this value is set to Monthly, System
Update will search updates on the day of
’Day Of The Month’.
v When set to Weekly, System Update will
search on the day of ’Day Of The Week’.
Day Of The Month Use this setting to set the day of the month for
when System Update will search for new
updates. Default: 1
Day Of The Week Use this setting to set the day of the week for
when System Update will search for new
updates. Default: Monday
Hour Use this setting to set the time of day for when
System Update will search for new updates.
Valid values: 0 - 23. Default: 0 and represents
midnight (12AM) while 23 represents 11PM.
TaskParameters The parameters to pass to the command that is
run for the scheduled System Update task.
Default: ’/CM -search R -action LIST -scheduler’
For more information on command line
parameters, see Appendix A, “Command line
parameters,” on page 71.
32 System Update Solution Deployment Guide