Lenovo ThinkVantage ImageUltra Builder Version 5.0 - Manual (Page 66)

Accessing the ImageUltra Builder server
To access the ImageUltra Builder server, do the following:
1.
Open Windows Explorer.
2. Open the Program files folder on your main drive.
3. Select the IBM folder, then select the Cloudscape_10.0 folder.
4. Double-click StartCloudscape.cmd.
Installing an ImageUltra Builder console and server
If you are not familiar with the ImageUltra Builder program, then you might want
to install it with both the console and server on the same computer. To install
ImageUltra Builder with both the console and server on the same computer, do the
following:
1. Insert the ImageUltra Builder DVD into the DVD drive of the computer. In
most cases, the installation program will start automatically. If the installation
program does not start automatically, complete the following procedure:
a.
Click Start.
b. Click Run.
c. Type x:\SETUP.EXE where x is the letter of your DVD drive, then click
OK
. The ImageUltra Builder InstallShield Wizard opens.
2. After the welcome screen has opened, click Next.
3. When the License Agreement appears, read the terms and select I accept the
terms in the license agreement
to continue on to the next screen. Or, select I
do not accept the terms in the license agreement to exit the installation
procedure.
4. In the next screen, type your User Name and Organization.
5. Select the appropriate option in the Install this application for section, then
click Next.
6. Select both ImageUltra Builder Console and ImageUltra Builder Server.
To select ImageUltra Builder Console and ImageUltra Builder Server, do the
following:
a.
Select the drop-down menu next to ImageUltra Builder Console, then
select This feature, and all sub features, will be installed on local hard
drive
.
b. Select the drop-down menu next to ImageUltra Builder Server, then select
This feature, and all sub features, will be installed on local hard drive
.
7. Click Next.
8. The Secure Server Repositories screen appears. Select Yes and click Next.
Note: If you select Yes, the Installation wizard will automatically add a
default Administrator ID and Password that will need to be changed.
For information on how to change the Administrator password, see
“Changing the default administration password.”
9. The Ready to Install the Program screen appears. Click Install.
10. When the installation is complete, click Finish.
Changing the default administration password
If you chose to make the server secure, an Administrator ID and password were
automatically generated for you. The default ID is Admin and the default
password is pwd. To change the password:
52 ImageUltra Builder Version 5.0: User Guide