Lenovo ThinkPad R61i - Manual (Page 109)

Table 35. Computer Configuration>Rescue and Recovery>Settings (continued)
Policy Setting Sub-Setting Description
Backup PreBackup Pre3 Command to run prior to
incremental backup number 3.
Include the full path to the file, if
that path is not in the environment
variable. Default: None.
Backup PreBackup PreParameters3 The parameter that passes the
command that is run prior to
incremental backup number 3.
Default: None.
Backup PreBackup PreShow3 Show or hide the command that is
run prior to incremental backup
number 3. Default: Show.
Backup PreBackup Pre4 Command to run prior to
incremental backup number 4.
Include the full path to the file, if
that path is not in the environment
variable. Default: None.
Backup PreBackup PreParameters4 The parameter that passes the
command that is run prior to
incremental backup number 4.
Default: None.
Backup PreBackup PreShow4 Show or hide the command that is
run prior to incremental backup
number 4. Default: Show.
Backup PreBackup Pre5 Command to run prior to
incremental backup number 5.
Include the full path to the file, if
that path is not in the environment
variable. Default: None.
Backup PreBackup PreParameters5 The parameter that passes the
command that is run prior to
incremental backup number 5.
Default: None.
Backup PreBackup PreShow5 Show or hide the command that is
run prior to incremental backup
number 5. Default: Show.
Backup PostBackup Post Command to run after a backup
concludes. Include the full path to
the file, if that path is not in the
environment variable. Default:
None.
Backup PostBackup PostParameters The parameter that passes the
command that is run following the
conclusion of a backup. Default:
None.
Backup PostBackup PostShow Show or hide the command that is
run following a backup. Default:
Show.
Appendix A. Administrative tools 101