Lenovo ThinkPad R61i - Manual (Page 110)

Table 35. Computer Configuration>Rescue and Recovery>Settings (continued)
Policy Setting Sub-Setting Description
Backup PostBackup Post0 Command to run after the base
backup concludes. Include the full
path to the file, if that path is not in
the environment variable. Default:
None.
Backup PostBackup PostParameters0 The parameter that passes the
command that is run following the
conclusion of the base backup.
Default: None.
Backup PostBackup PostShow0 Show or hide the command that is
run following the base backup.
Default: Show.
Backup PostBackup Post1 Command to run after incremental
backup number 1 concludes.
Include the full path to the file, if
that path is not in the environment
variable. Default: None.
Backup PostBackup PostParameters1 The parameter that passes the
command that is run following the
conclusion of incremental backup
number 1. Default: None.
Backup PostBackup PostShow1 Show or hide the command that is
run following incremental backup
number 1. Default: Show.
Backup PostBackup Post2 Command to run after incremental
backup number 2 concludes.
Include the full path to the file, if
that path is not in the environment
variable. Default: None.
Backup PostBackup PostParameters2 The parameter that passes the
command that is run following the
conclusion of incremental backup
number 2. Default: None.
Backup PostBackup PostShow2 Show or hide the command that is
run following incremental backup
number 2. Default: Show.
Backup PostBackup Post3 Command to run after incremental
backup number 3 concludes.
Include the full path to the file, if
that path is not in the environment
variable. Default: None.
Backup PostBackup PostParameters3 The parameter that passes the
command that is run following the
conclusion of incremental backup
number 3. Default: None.
Backup PostBackup PostShow3 Show or hide the command that is
run following incremental backup
number 3. Default: Show.
102 Rescue and Recovery 4.21 Deployment Guide