Lenovo ThinkPad R61i - Manual (Page 111)

Table 35. Computer Configuration>Rescue and Recovery>Settings (continued)
Policy Setting Sub-Setting Description
Backup PostBackup Post4 Command to run after incremental
backup number 4 concludes.
Include the full path to the file, if
that path is not in the environment
variable. Default: None.
Backup PostBackup PostParameters4 The parameter that passes the
command that is run following the
conclusion of incremental backup
number 4. Default: None.
Backup PostBackup PostShow4 Show or hide the command that is
run following incremental backup
number 4. Default: Show.
Backup PostBackup Post5 Command to run after incremental
backup number 5 concludes.
Include the full path to the file, if
that path is not in the environment
variable. Default: None.
Backup PostBackup PostParameters5 The parameter that passes the
command that is run following the
conclusion of incremental backup
number 5. Default: None.
Backup PostBackup PostShow5 Show or hide the command that is
run following incremental backup
number 5. Default: Show.
Backup Backup Local Enable or disable ’Backup Local’ as
a selected destination for backup.
Default: Enabled.
Backup Backup Second Enable or disable ’Backup Second’
as a selected destination for backup.
Default: Disabled.
Notes:
1. If a service partition backup fails
due to insufficient space,
manually delete partial backups
before attempting another
backup or restoring from the
failed backup.
2. When backing up the service
partition to external media, set
the following registry key before
restoring your system with
Rescue and Recovery:
HKLM\Software\Lenovo\
Rescue and Recovery\
Settings\Backup\
BackupSPNetwork=1
Appendix A. Administrative tools 103