Lenovo ThinkPad R61i - Manual (Page 63)

Table 22. (continued)
Command Parameters Parameter Values and Examples
<Applications> <Application>
For a list of all the applications that
are supported, see the ThinkVantage
System Migration Assistant User’s
Guide located at:
http://www.lenovo.com
/thinkvantage
For example: To capture all
applications supported, set $(all).
<Applications>
<Application>
Lotus Notes
</Application>
<Application>
Microsoft Office
</Application>
</Applications>
or
<Applications>
<Application>
$(all)
</Application>
</Applications>
<Registries>
v <Registry>
v <hive>
v <keyname>
v <value>
To capture or apply the registry
settings, specify the hive, keyname
and value as the parameters in the
command file. For example:
<HKEY_CURRENT_USER>
<Control Panel><Colors><Menu
Bar><236.233.218>.
<IncUsers> <UserName> To capture all user profiles, set
$(all) or use *\* as a wild card for
all users. Otherwise, specify users
individually.
The following wild cards are
available.
v *\* for a variable length wild
card
v % for a fixed length wild card (1
character)
For example:
<IncUsers>
<UserName>
Administrator
</UserName>
<UserName>
domain\Kelli
</UserName>
</IncUsers>
<ExcUsers> <UserName> To exclude users from the
migration process, specify the
domain and user name of the user.
The following wild cards are
available.
v * for a variable length wild card
v % for a fixed length wild card (1
character)
Chapter 4. Rejuvenation and migration 55