Lenovo ThinkPad R61i User Manual
Page 124
Table 35. Computer Configuration>Rescue and Recovery>Settings (continued)
Policy
Setting
Sub-Setting
Description
Rejuvenate
PostRejuvenate
Parameters
The parameter that passes the
command that is run following a
rejuvenation restore. Default: None.
Rejuvenate
PostRejuvenate
Show
Show or hide the command that is
run following a rejuvenation restore.
Default: Show.
Rejuvenate
PostRejuvenate
Reboot
Enable or disable a system reboot
following a rejuvenation restore.
Default: Enabled.
Mapped
Network Drive
UNC
UNC location for the mapped
network drive (format
\\server\share). Default: None.
Mapped
Network Drive
User
Use mapdrv.exe /view command to
create an encrpyted value for this
field. Default: None.
User Messages
Bootable Second
Show or hide the ’Bootable Second’
message. Default: Hide.
User Messages
Bootable USB
Show or hide the ’Bootable USB’
message. Default: Hide.
User Messages
Location Not Found
Show or hide the ’Location Not
Found’ message. Default: Show
Note: If the location is a USB drive,
this message will still be displayed.
User Messages
Missed Backup
Show or hide the ’Missed Backup’
message. Default: Show.
User Messages
No Battery
Show or hide the ’No Battery’
message. Default: Show.
User Messages
Scheduled Base
Show or hide the ’Scheduled Base’
message. Default: Show.
User Messages
Power Loss Backup
Show or hide the ’Power Loss
Backup’ message. Default: Show.
User Messages
Post Rejuvenate
Reboot
Show or hide the ’Post Rejuvenate
Reboot’ message. Default: Show.
Lock Hard Disk
Enable or disable the ’Lock Hard
Disk’ setting. Default: Disabled.
Parse
Environment
Variables
Enable or disable the ’Parse
Environment Variables’ setting.
Default: Enabled.
Set PP Archive
Before Backup
Enable or disable the ’Set PP
Archive Before Backup’ setting.
Default: Enabled.
Max Silent
Retries
Set the maximum number of ’Silent
Retries’ to network share. Default: 3.
Exclude
Enable or disable the ’Exclude’
setting. Default: Enabled.
Include
Enable or disable the ’Include’
setting. Default: Disabled.
SIS
Enable or disable the ’SIS’ setting.
Default: Disabled.
116
Rescue and Recovery 4.21 Deployment Guide