Replacing the battery – Lenovo Flex 20 All-in-One IdeaCentre User Manual
Page 36
Step 6.
Use a flat head screw driver, put the head of screwdriver into the slot in between the panel and the
rear cover as shown. Then prise the rear cover away from the panel.
3
Step 7.
Disconnect the transform cable from the connector, and separate the rear cover and the panel.
4
Step 8.
To reattach the rear cover:
a.
Line up the rear cover with the front bezel and reconnect the transform cable.
b.
Line up the holes on the rear cover with mounting holes on the front bezel, and place the rear
cover into position.
c.
Secure the rear cover to the front bezel with the two screws.
d.
Reattach the two rubber caps.
Replacing the battery
Note: Turn off the computer and wait 3 to 5 minutes to let it cool down before removing the base cover.
To replace the battery:
30
Lenovo Flex 20 All-In-One PC Hardware Maintenance Manual