Lenovo Flex 20 All-in-One IdeaCentre User Manual
Page 39
Advertising
Step 6.
Remove the 4 screws that secure the hard disk drive to the rear cover.
1
Step 7.
Lift up the hard disk drive to remove it.
2
Step 8.
Disconnect the data and power cable from the hard disk drive.
Step 9.
Remove the 4 screws that secure the hard disk drive to the bracket pieces.
3
Step 10. To install the new hard disk drive:
a.
Attach the bracket pieces to the new hard disk drive, and secure them with the 4 screws.
Chapter 8
.
Replacing hardware
33
Advertising