Lenovo Flex 20 All-in-One IdeaCentre - Manual (Page 38)

Step 1. Remove any media (disks, CDs, DVDs or memory cards) from the drives, shut down the operating
system, and turn off the computer and all attached devices.
Step 2. Unplug all power cords from electrical outlets.
Step 3. Disconnect all cables attached to the computer. This includes power cords, input/output (I/O)
cables, and any other cables that are connected to the computer. Refer to “Left and right view”
and “Rear view” for help with locating the various connectors.
Step 4. Remove the rear cover. Refer to "Removing the rear cover".
Step 5. Disconnect the battery power cable from the connector on the motherboard.
32 Lenovo Flex 20 All-In-One PC Hardware Maintenance Manual