Replacing the hard disk drive – Lenovo Horizon 2 27 Table PC IdeaCentre User Manual

Page 33

Advertising
background image

Step 7.

Remove the screw that secures the Wi-Fi card to the motherboard.

1

Step 8.

Disconnect the antenna cable and data cable from the Wi-Fi card.

2

Step 9.

Pull the Wi-Fi card upward to remove it from the card port.

3

Step 10. To install the new Wi-Fi card:

a.

Line up the new Wi-Fi card with the card port, insert the card into position and secure it
with the screw.

b.

Reconnect the antenna and data cable to the new Wi-Fi card.

c.

Reconnect the battery cable to the connector on the motherboard.

Step 11. Reattach the rear cover.

Replacing the hard disk drive

Attention: Turn off the computer and wait 3 to 5 minutes to let it cool down before removing the base cover.

To replace the hard disk drive:

Step 1.

Remove any media (disks, CDs, DVDs or memory cards) from the drives, shut down the operating
system, and turn off the computer and all attached devices.

Step 2.

Unplug all power cords from electrical outlets.

Step 3.

Disconnect all cables attached to the computer. This includes power cords, input/output (I/O)
cables, and any other cables that are connected to the computer. Refer to “Left and right view”
and “Rear view” for help with locating the various connectors.

Step 4.

Remove the rear cover. Refer to “Removing the rear cover”.

Step 5.

Disconnect the battery cable from the connector on motherboard. Refer to “Replacing the battery”.

Chapter 7

.

Replacing hardware

27

Advertising