Lenovo Horizon 2 27 Table PC IdeaCentre User Manual
Page 42
Note: It may be helpful to place the computer face-down on a soft flat surface for this procedure. Lenovo
recommends that you use a blanket, towel, or other soft cloth to protect the computer screen from scratches
or other damage.
To replace the LED panel module:
Step 1.
Remove any media (disks, CDs, DVDs, or memory cards) from the drives, shut down the operating
system, and turn off the computer and all attached devices.
Step 2.
Unplug all power cords from electrical outlets.
Step 3.
Disconnect all cables attached to the computer. This includes power cords, input/output (I/O)
cables, and any other cables that are connected to the computer. Refer to “Left and right view”
and “Rear view” for help with locating the various connectors.
Step 4.
Remove the rear cover. Refer to “Removing the rear cover”.
Step 5.
Remove the camera. Refer to “Replacing the camera”.
Step 6.
Remove all the cables attached to the front bezel.
Step 7.
To install the new the LED panel:
a.
Connect all the cables to the connectors on the LED panel module.
b.
Attach the camera to the new LED panel.
Step 8.
Reattach the rear cover.
36
IdeaCentre Horizon 2 27 All-In-One PC Hardware Maintenance Manual