Lenovo Horizon 2 27 Table PC IdeaCentre - Manual (Page 41)

Step 5. Remove the two screws that secure the camera and bracket to the front bezel. Lift up the camera
and bracket to remove it.
Step 6. Remove the camera from bracket by removing the two screws and disconnect the data cable
from the camera.
Step 7. To install the new camera:
a. Connect the data cable to the new camera.
b. Secure the new camera to the bracket with the two screws.
c. Line up the holes in the bracket with the mounting holes on the front bezel and secure the
new camera with the two screws.
Step 8. Reattach the rear cover.
Replacing the LED panel module
Note: Turn off the computer and wait 3 to 5 minutes to let it cool down before removing the base cover.
Chapter 7 . Replacing hardware 35