Lenovo ThinkCentre M82 - Manual (Page 17)

1 USB 2.0 connector Use this connector to attach a device that requires a USB
2.0 connection, such as a keyboard, a mouse, a scanner,
a printer, or a personal digital assistant (PDA).
2 USB 3.0 connector Use this connector to attach a device that requires a USB
2.0 or 3.0 connection, such as a keyboard, a mouse, a
scanner, a printer, or a personal digital assistant (PDA).
3 Serial port Use this port to attach an external modem, a serial
printer, or other devices that use a 9-pin serial port.
4 Ethernet connector Use this connector to attach the computer to an
Ethernet-type local area network or to a cable modem.
Important: To operate the computer within FCC limits
when it is connected to an Ethernet network, use a
Category 5 Ethernet cable.
9. Connect the power cords to properly grounded electrical outlets.
Turning on computer power
Turn on the monitor and other external devices first, and then turn on the computer.
When the power-on self-test (POST) is finished, the logo window closes. If your
computer has preinstalled software, the software installation program starts.
Completing the software installation
Important: Read the license agreements carefully before using the programs on
this computer. These agreements detail your rights, obligations, and warranties
for the software on this computer. By using these programs, you accept the terms
of the agreements. If you do not accept the agreements, do not use the programs.
Instead, promptly return the entire computer for a full refund.
The first time you start your computer, follow the instructions on the screen to
complete the software installation. If you do not complete the software installation
the first time you start your computer, unpredictable results might occur.
Chapter 2. Setting up your computer
13