Lenovo THINKPAD Z60M - Manual (Page 62)

Table 23. (continued)
Command Parameter Description Example
<Inclusions> <SizeCompare>
<Operand>
<Size>
<Dest>
<Operation> where
v <SizeCompare> is the optional
parameter to select files based on
their size.
– <Operand> is either LARGER
or SMALLER.
– <Size> is the file size in MB.
v <Dest> is an optional parameter
that specifies the name of the
destination folder on the target
system where the files will be
written.
v <Operation> is an optional
parameter that specifies how the
file path is to be handled. Specify
either of the following:
– P - preserves the path of the
file and recreates the file on
the target system starting at
the location specified by the
<Dest> parameter.
– R - removes the path of the
file and places the file directly
in the location specified by the
<Dest> parameter.
Note: If the P or R command is
not used in the <Operation> tag,
the default is to leave the
<Operation> empty, for example,
<Operation></Operation>.
Example 2
<Inclusions>
<IncDescription>
<Descriptin>C:\MyWorkFolder\*.*
</Decsription>
<DateCompare>
<Operand>NEWER</Operand>
<Date>07/31/2005</Date>
</DateCompare>
</IncDescription>
</Inclusions>
Example 3
<Inclusions>
<IncDescription>
<Description>C:\MyWorkFolder/*.*
</Description>
<SizeCompare>
<Operand>SMALLER</Operand>
<Size>200</Size>
</SizeCompare>
</IncDescription>
</Inclusions>
Example 4
<Inclusions>
<IncDescription>
<Description>C:\MyWorkFolder\*.*
</Description>
<Dest>D:\MyNewWorkFolder</Dest>
<Operation>
</Operation>
<IncDescription>
</Inclusions>
56 Rescue and Recovery Deployment Guide Version 4.1