Lenovo THINKPAD Z60M - Manual (Page 144)

System Migration Assistant
The module is command-line program compatible with old SMA4.2 smabat.exe.
Command parameters and the control card (commands.txt) to the module should
be compatible with SMA 5.2.
Active Update
Active Update is an eSupport technology that utilizes the update clients on the
local system to deliver the desired packages on the Web without any user
interaction. Active Update queries the available update clients and uses the
updated client to install the desired package. Active Update will launch
ThinkVantage System Update or Software Installer on the system.
To determine if the Active Update Launcher is installed, check for the existence of
the following registry key:
HKLM\SOFTWARE\Thinkvantage\ActiveUpdate
To determine if the registry is configured to allow Active Update, the
ThinkVantage Technology program should check within its own registry key for
the value of the EnableActiveUpdate attribute. If EnableActiveUpdate=1, the
ThinkVantage Technology program should add the Active Update menu item
under the Help menu.
To call Active Update, the calling ThinkVantage Technology program should
launch the Active Update Launcher program and pass a parameter file. (See the
Active Update Parameter File for a description of the parameter file).
To disable Active Update Launcher menu item from help menu for all
ThinkVantage Technology programs:
1. Go to the HKLM\Software\ThinkVantage\ActiveUpdate registry key
2. Rename or delete the Active Update key
To disable Active Update Launcher menu item from help menu for individual
ThinkVantage Technology program:
1. Go to the registry key:
v For Rescue and Recovery - HKLM\Software\Lenovo\Rescue and Recovery
v For Client Security Solution- HKLM\Software\Lenovo\Client Security
Software
2. Add the DWORD value EnableActiveUpdate and set value to 0
To enable the Active Update Launcher menu item from the help menu if it is not
available under the help menu for the individual TVT:
1. Go to the registry key:
v For Rescue and Recovery - HKLM\Software\Lenovo\Rescue and Recovery
v For Client Security Solution- HKLM\Software\Lenovo\Client Security
Software
2. Add the DWORD value EnableActiveUpdate and set value to 1
Active Update Parameter File
The Active Update parameter file contains the settings to be passed to Active
Update. The TargetApp parameter is passed as shown in this example:
<root>
<TargetApp>ACCESSLENOVO</TargetApp>
</root>
138 Rescue and Recovery Deployment Guide Version 4.1