Lenovo THINKPAD Z60M - Manual (Page 20)

Table 4. X:\PQ\RRUSAVE.TXT (continued)
Script language Result
SELECT PARTITION ALL
(Needed if you have a type 12 partition or if
you have multiple partitions in your image.)
Selects all partitions.
Store with compression high Stores the image.
Table 5. X:\PQ\RRDEPLY.TXT
Script language Result
SELECT DRIVE 1 Selects the first hard disk drive.
DELETE ALL Deletes all partitions.
SELECT FREESPACE FIRST Selects first free space.
SELECT IMAGE ALL Selects all partitions in image.
RESTORE Restores the image.
Image creation:
Table 6. X:\PQ\PQIMGCTR / CMD=X:\PQ\RRUSAVE.TXT /MBI=1 / IMG=X:\IMAGE.PQI
Script language Result
SELECT DRIVE 1 Selects the first hard disk drive.
X:\PQ\PQIMGCTR Creates the image program.
/CMD=X:\PQ\RRUSAVE.TXT PowerQuest script file.
/MBI=1 Captures the Rescue and Recovery Boot
Manager.
/IMG=X:\IMAGE.PQI Creates the image file.
Image deployment:
Table 7. X:\PQ\PQIMGCTR / CMD=X:\PQ\RRDEPLY.TXT /MBI=1 / IMG=X:\IMAGE.PQI
Script language Result
SELECT DRIVE 1 Selects first hard disk drive.
X:\PQ\PQIMGCTR Creates the image program.
/CMD=X:\PQ\RRDEPLY.TXT Creates the PowerQuest script file.
/MBR=1 Restores the Rescue and Recovery Boot
Manager.
/IMG=X:\IMAGE.PQI Creates the image file.
Using Symantec Ghost-based tools with Rescue and Recovery
When you create the Ghost image, you must use the command line switch -ib to
capture the Rescue and Recovery Boot Manager. Also, the image must capture the
whole disk and all partitions. Refer to the documentation provided by Symantec
for specific details on Ghost.
Rescue and Recovery environmental variables
The following table contains environmental variables which are created when
Rescue and Recovery is installed. These variables can be used when creating
scripts or when changing to a desired directory from a command prompt. For
14 Rescue and Recovery Deployment Guide Version 4.1