Lenovo ThinkServer TS430 User Manual
Page 140
Advertising
3. Use any documentation that comes with the hot-swap hard disk drive and follow those instructions in
addition to the instructions in this topic.
To install or replace a hot-swap hard disk drive, do the following:
1. Use the front door key to unlock the front door and then use the front door handle
1
to pivot the
front door to the open position.
Figure 66. Opening the front door of the server
2. Locate the appropriate hard-disk-drive bay. See “Server components” on page 25.
128
ThinkServer TS430 User Guide
Advertising