Lenovo ThinkServer TS430 - Manual (Page 73)

Menu item Submenu item Selections Comments
• Power on • If you have selected Stay off,
the server will stay in the off
state.
• If you have selected Last
State, the server will resume
to the last state.
• If you have selected Power
on, the server will restart
automatically.
SATA Mode • IDE Mode
• AHCI Mode
• RAID Mode
Select SATA controller operation
mode. If you want to configure
RAID, choose RAID Mode for the
SATA controller.
SATA Port0 View the information about the
SATA device connected to the
SATA connector 0 on the system
board.
SATA Port1 View the information about the
SATA device connected to the
SATA connector 1 on the system
board.
SATA Port2 View the information about the
SATA device connected to the
SATA connector 2 on the system
board.
SATA Port3 View the information about the
SATA device connected to the
SATA connector 3 on the system
board.
SATA Port4 View the information about the
SATA device connected to the
SATA connector 4 on the system
board.
SATA Configuration
(set SATA configuration
parameters)
SATA Port5 View the information about the
SATA device connected to the
SATA connector 5 on the system
board.
Onboard Graphics
Controller • Disabled
• Enabled
Enable or disable the onboard
graphics controller.
Primary Graphics • Onboard
• Add-On
Choose a mode for primary
graphics. The Add-On option
requires a graphics card installed.
Onboard LAN1 I/O ROM • Disabled
• Enabled
Enable or disable the onboard
LAN1 I/O ROM.
Onboard LAN2 I/O ROM • Disabled
• Enabled
Enable or disable the onboard
LAN2 I/O ROM.
PCI Configuration (set PCI
configuration parameters)
Chapter 5 . Configuring the server 61