Lenovo THINKSTATION S10 - Manual (Page 43)

5. Press the drive latch 2 and slide the drive 1 from the chassis.
6. Disconnect the flat cable from the rear of the failing diskette drive.
7. Connect the flat cable to the new diskette drive.
8. Install the new drive into the drive-bay assembly and lock the drive into
position.
9. Go to Chapter 4, “Completing the parts replacement,” on page 43.
Figure 22. Removing the diskette drive or optional card reader drive
Figure 23. Replacing the diskette drive or optional card reader drive
Chapter 3. Installing options and replacing hardware 35