Locating parts on the system board, Locating internal drives – Lenovo H520e Desktop User Manual

Page 71

Advertising
background image

Locating parts on the system board

Figure 4 “System board part locations” on page 67 shows the locations of the parts on the system board.

Figure 4. System board part locations

1

4-pin power connector

12

Clear CMOS (Complementary Metal Oxide Semiconductor)

/Recovery jumper

2

Microprocessor

13

Front USB connector 2 (for connecting additional USB

devices)

3

Microprocessor fan connector

14

Front USB connector 3 (for connecting additional USB

devices)

4

Memory slot 1 (DIMM1)

15

Battery

5

Memory slot 2 (DIMM2)

16

Serial (COM2) connector

6

Thermal sensor connector

17

Front audio connector

7

24-pin power connector

18

Internal speaker connector

8

Power fan connector

19

PCI Express x1 card slots (2)

9

SATA connectors (3)

20

PCI Express x16 graphics card slot

10

Front panel connector (for connecting LED

indicators and power switch)

21

System fan connector

11

Front USB connector 1 (for connecting USB

ports 1 and 2 on the front bezel)

Locating internal drives

Internal drives are devices that your computer uses to read and store data. You can add drives to your
computer to increase storage capacity and enable your computer to read other types of media. Internal
drives are installed in bays. In this manual, the bays are referred to as bay 1, bay 2, and so on.

When installing or replacing an internal drive, it is important to note the type and size of the drive that you
can install or replace in each bay and correctly connect the cables to the drive installed. Refer to the
appropriate section in “Installing or replacing hardware” on page 69 for instructions on how to install or
replace internal drives for your computer.

Chapter 8

.

Locations

67

Advertising