Lenovo H520e Desktop User Manual
Page 78
• If you are replacing an old PCI card, grasp the old card that is currently installed and gently pull it
out of the slot.
Figure 10. Removing a PCI card
Notes:
a. The card fits tightly into the card slot. If necessary, alternate moving each side of the card a small
amount until it is removed from the card slot.
b. If the card is held in place by a retaining latch, press the card retaining latch
1
as shown to
disengage the latch. Grasp the card and gently pull it out of the slot.
5. Remove the new PCI card from its static-protective package.
6. Install the new PCI card into the appropriate slot on the system board. See “Locating parts on the
Note: If you are installing a PCI Express x16 graphics card, make sure the memory slot retaining clips
are closed before you install the graphics card.
7. Pivot the card latch to the closed position to secure the PCI card.
74
Lenovo H520e Hardware Maintenance Manual