Aiphone IS-SOFT User Manual
Page 23
23
GETTING STARTED
APPENDIX
USING THE PC MASTER STATION
F
Searching for a remote site as the target of
calling, paging or chime paging from the list
[REMOTE SITE]
Select [REMOTE SITE] from the SEARCH LIST.
1
All the registered remote sites are displayed in the list.
Click
2
to select the target site (so that it is
highlighted).
After this step, you can call the pilot station of the ta
*
rget
site with the “Normal” priority by clicking
.
For other calling operations such as selecting the priority,
refer to P. 25.
After clicking
3
, select the performance you want
to do from [CALL], [PAGING] and [CHIME] from the
list (so that it is highlighted).
Start calling, paging or chime paging by following the
4
procedure for the corresponding performance.
(→P. 25-27)
NOTES:
Before you perform calling, paging or chime paging to a
•
remote site, confi rm what unit(s) in the site will receive and/or
respond to your performance.
You cannot select two or more remote sites.
•
Searching for a station or zone by number
using the dial keys
Click
1
to display the Dial keys window.
Enter the number of the station or zone you want
2
to search for by using the dial keys in the standby
mode.
The entered numbers are displayed, and all the stations
and/or zones that include the entered number are
displayed in the list.
The search is narrowed down whenever a fi gure is
*
added.
Click
3
to select the target station and/or zone (so
that it is highlighted).
You can select up to 5 stations and/or zones.
*
(→P. 21)
Start calling (talking), monitoring or paging by
4
following the procedure for the corresponding
performance.
(→P. 25-27)