Konica Minolta bizhub PRESS C8000e - Manual (Page 192)

How to troubleshoot Chapter 9: Troubleshooting
9-14
About other trouble
About the other troubles, follow the procedures below.
In case of copy function
1.
Check the main power of the machine.
• If the setting is correct, go on to next step.
2.
Confirm that the Service Call screen is not displayed.
• When the Service Call screen is displayed, turn OFF/ON the power
of the copier. If the machine is not restored after being turned on, go
to Step 6.
If no error is found, go on to next step. p. 1-2
3.
Confirm that the [Start] button is not orange.
• When the [Start] button is orange, follow the message displayed on
the screen to solve the troubles.
If no error is found, go on to next step.
4.
Confirm that the [MACHINE] tab is not orange.
• When the [MACHINE] tab is orange, follow the message displayed
on the screen to solve the troubles.
If no error is found, go on to next step.
5.
Confirm that any other message is not displayed on the
screen.
• If no error is found, go on to next step.
6.
Contact your service representative.