Relay user box, Confidential rx user box, Relay user box -8 confidential rx user box -8 – Konica Minolta BIZHUB 223 User Manual
Page 221: E relayed. (p. 8-8), P. 8-8)
bizhub 423/363/283/223
8-8
8.2
User mode settings
8
Relay User Box
You can create up to five Relay User Boxes. The creation and editing setting items are as follows.
Reference
-
To change the setting of a created User Box, select the target User Box and press [Edit].
-
If [Edit] is selected, you cannot change the User Box number.
-
To delete a created User Box, select the target User Box and press [Delete].
d
Reference
For details on how to register the header or footer, refer to the [User's Guide Network Scan/Fax/Network Fax
Operations].
Confidential RX User Box
You can register up to 20 Confidential RX User Boxes. The available setting items are as follows.
Reference
-
The Confidential RX User Box is available when a Fax Kit is installed while no Hard Disk is installed.
-
If a Hard Disk is installed, Confidential RX can be enabled when the Confidential RX function is added
to the Public/Personal/Group User Box. For details, refer to page 8-5.
-
To change the setting of a created User Box, select the target User Box and press [Edit].
-
If [Edit] is selected, you cannot change the User Box number.
-
To delete a created User Box, select the target User Box and press [Delete].
Item
Description
[User Box No.]
Automatically displays an unassigned number. To specify a User Box
number, press [User Box No.], and use the keypad to enter the User Box
number between 1 and 999999999.
[User Box Name]
Press [User Box Name], and enter the User Box name in the control panel
(up to 20 characters). Specifying different User Box numbers enables you
to create User Boxes with the same name.
[Relay Destination]
Select a relay destination to send data from the Relay User Box. Pre-reg-
ister the relay destination as a group destination.
•
When registering a group destination as a relay destination, be sure to
set Abbreviation Dial in the group destination in advance.
[Relay TX Password]
Specify a password to limit access to the User Box. Press [Relay TX Pass-
word], and enter the password in the control panel (up to 8 characters).