Konica Minolta BIZHUB 223 - Manual (Page 35)

bizhub 423/363/283/223 3-3
3.1 Control panel 3
7 CAUTION
- Do not apply extreme pressure to the touch panel, otherwise the touch panel may be scratched or dam-
aged. Never push down on the touch panel with force, and never use a hard or pointed object to make
a selection in the touch panel.
8 Interrupt Press this key to enter Interrupt mode. While the machine is in Interrupt
mode, the indicator on the Interrupt key lights up in green and the mes-
sage "Now in Interrupt mode." appears on the touch panel. To cancel In-
terrupt mode, press the Interrupt key again.
9 Stop Pressing the Stop key during scanning temporarily stops the scan oper-
ation.
10 Proof Copy Press this key to print a single proof copy to be checked before printing
a large number of copies. You can check the finishing state on the touch
panel by pressing this key before scanning or copying.
•
This key is not available when saving documents by pressing the
User Box key.
• To check the preview image when saving in a User Box, press the
Fax/Scan key. For checking preview procedure, refer to the [User's
Guide Network Scan/Fax/Network Fax Operations].
11 Start Press this key to start scanning. When this machine is ready to begin a
scan operation, the indicator on the Start key lights up in blue. If the in-
dicator on the Start key lights up in orange, scan operation cannot be
started. Press this key to restart a stopped job.
12 Data Indicator Flashes in blue while a print job is being received. Lights up in blue when
data is being printed.
13 C Press this key to erase a value (such as the number of copies, a zoom
ratio, or a size) entered using the keypad.
14 Keypad Press this key to enter the number of copies, zoom ratio, and various
other settings.
15 Guidance Press this key to display the Guidance screen. From this screen, you can
view descriptions of the various functions and details of operations.
16 Enlarge Display Press this key to enter Enlarge Display mode. If you use PageScope Au-
thentication Manager for authentication, the Enlarge Display screen is
not available.
17 Accessibility Press this key to display the screen for configuring settings for user ac-
cessibility functions.
18 Access If user authentication or account track settings have been applied, press
this key after entering the user name and password (for user authentica-
tion) or the account name and password (for account track) in order to
use this machine. Press this key to log off from the machine as well.
19 Brightness adjust-
ment dial Use this dial to adjust the brightness of the touch panel.
20 User Box Press this key to enter User Box mode. While the machine is in User Box
mode, the indicator on the User Box key lights up in green.
21 Fax/Scan Press this key to enter Fax/Scan mode. While the machine is in Fax/Scan
mode, the indicator on the Fax/Scan key lights up in green. For details
on the fax and scan functions, refer to the [User's Guide Network
Scan/Fax/Network Fax Operations].
22 Copy Press this key to enter Copy mode. (As a default, the machine is in Copy
mode.) While the machine is in Copy mode, the indicator on the Copy
key lights up in green. For details, refer to the [User's Guide Copy Oper-
ations].
No. Name Description