Konica Minolta BIZHUB 223 - Manual (Page 280)

bizhub 423/363/283/223 9-35
9.6 Administrator Mode Overview 9
Reference
- The following functions are available only when a Hard Disk is installed.
– [License Settings]
– [Edit Font/Macro] (This item is displayed, but cannot be specified.)
– [Job Log]
9.6.2 System Settings
Reference
- To use this machine as a scanner with the application software under TWAIN, install the dedicated driv-
er software KONICA MINOLTA TWAIN. For details, refer to the TWAIN driver manual in the CD sup-
plied together with this machine.
[License Settings] Allows you to issue a license and enable functions. Also, a request code
can be issued.
[Edit Font/Macro] Adds font or macro.
[Job Log] Allows you to create and download log data of the jobs that were executed
in this machine.
Item Description
Item Description
[Machine Setting] Changes the registration information of this machine.
[Register Support Informa-
tion] Specify support information (such as contact name, corporate URL, or on-
line manual URL) of this machine. To display this information, select [Infor-
mation] - [Online Assistance].
[Network TWAIN] Specify the time to release the operation lock when scanning (excluding
push-scanning). If necessary, configure settings to enable saving or read-
ing a document in or from the external memory.
[User Box Setting] Define the User Box functions such as deleting an unnecessary User Box
or specifying the document deletion time. If necessary, configure settings
to enable saving or reading a document in or from the external memory.
[Stamp Settings] Register a header or footer. In addition, in [Fax TX Settings], specify wheth-
er to cancel the stamp setting for fax transmission.
[Blank Page Print Settings] Specify whether to print contents configured in [Stamp/Composition] on
blank pages.
[Skip Job Operation Set-
tings] Specify whether to skip a job.
[Flash Display Setting] Specify whether to allow or restrict the flash display.