Konica Minolta BIZHUB 223 - Manual (Page 39)

bizhub 423/363/283/223 3-7
3.2 Touch panel 3
Job List - Job Details
Press this button to view the list of jobs being performed and the job log for confirmation. There are the fol-
lowing four types of jobs:
Reference
- The function for saving a document in the Public/Personal/Group User Box is available only when a
Hard Disk is installed.
- The Confidential RX User Box is not available when a Hard Disk is installed.
- If a Hard Disk is installed, Confidential RX can be enabled when the Confidential RX function is added
to the Public/Personal/Group User Box. For details, refer to page 8-5.
<Current Jobs of [Print]>
Item Description
[Print] Lists print jobs for copying, computer printout, received faxes, or reports.
[Send] Lists scanner and fax transmission jobs.
[Receive] Lists fax reception jobs.
[Save] Lists User Box saving jobs.
Item Description
List items No.: Job identification number assigned when the job is queued.
User Name: Displays the user name or user name/account name of the
user who stored the document.
Status: The status of the job (receiving/queued/printing/printing
stopped/print error/saving to memory) is displayed.
Document Name: File name being printed.
Time Stored: Displays the time that the job was queued.
Org.: Displays the number of pages in the original.
Copies: Displays the number of copies to be printed.
[ ][ ] When there are more than the upper limit of seven jobs to be displayed at
one time, press these buttons to display other jobs.
[Delete] Press this button to delete the selected job.
[Increase Priority] Press this button to change the priority of the job.
•
If you set Changing Job Priority in Administrator Settings to "Restrict",
you cannot specify the output priority of the jobs.
• If the setting is specified so that the current print job can be interrupted,
printing is interrupted and printing of the job given priority begins. Print-
ing of the interrupted job restarts automatically once printing for the job
given priority is finished.
[Release Held Job] Press this button to change the settings of a stored job, or print or delete
the job.
[Check Job Set.] Press this button to check the settings of the selected job. Press either
[
Back] or [Forward ] to check the settings.