Konica Minolta bizhub C10X - Manual (Page 109)

Making Advanced Copies 95
Setting Duplex (Double-Sided) Copying
Duplex (Double-Sided) Copying From the ADF
If duplex (Double-Sided) copying is set, copies can be printed on both sides
of the media.
"
The duplex option must be installed in order to set duplex (Dou-
ble-Sided) copying.
1
Press the Function key.
2
Press the + or , key to select 2.DUPLEX , and then press the Menu/
Select key.
"
If the duplex option is not installed, 2.DUPLEX does not appear.
"
This screen appears only if the duplex option is installed.
3
Press the * or ) key to select LONG EDGE or SHORT EDGE , and then
press the Menu/Select key.
The main screen appears again, and
appears in the message window.
"
When making Double-Sided copies in full color, printing will begin 30
to 50 seconds after scanning of the document is finished.
"
When LONG EDGE or SHORT EDGE is selected, duplex (Dou-
ble-Sided) copying is performed as described below.
If LONG EDGE is selected, the pages will be laid out to flip
at the sides.
If SHORT EDGE is selected, the pages will be laid out to flip
at the top.
1 1
1
1
2
3
1
3
1
2
1