Konica Minolta bizhub C10X - Manual (Page 124)

Specifying a Recipient 110
Specifying a Recipient
The recipients can be specified in any of the following ways.
„
Direct input: Directly enter the E-mail address.
„ Using a one-touch dial key: Specify a recipient registered with a
one-touch dial key.
„ Using speed dial numbers: Specify a recipient registered with a speed dial
number.
„ Using the phone book functions: List or search for recipients registered as
one-touch dial keys or speed dial numbers, and then select a recipient.
Directly Entering an E-mail Address
1
Use the numeric keypad to type in the E-mail address for the recipient.
"
For details on entering/editing text and the characters that can be
entered, refer to “Entering Text” on page 214.
"
To erase the entered E-mail address, hold down the Cancel/C key for
about one second, or press the Stop/Reset key.
Using a One-Touch Dial Key
If a recipient has been registered with a one-touch dial key, the recipient’s
E-mail address can be entered simply by pressing the programmed
one-touch dial key.
"
The recipient must have been registered with a one-touch dial key in
advance. For details, refer to “One-Touch Dialing” on page 115.
1
Press the desired one-touch dial key.
"
Press the one-touch dial key programmed with the group dial recipi-
ents to send an E-mail to multiple recipients.
If a one-touch key programmed with group dial recipients is selected
in the screen for specifying the TO address, all E-mail addresses
included in the group dial are added to the TO address. If it is selected
in the screen for specifying the CC address, all addresses are added
to the CC address.
"
If an incorrect recipient was selected, press the Cancel/C key.