Konica Minolta bizhub C10X - Manual (Page 27)

About the Control Panel 13
4 Display key Press to check the status of this machine and the
specified settings.
„ Displays a rough estimate of the amount of toner
remaining.
„ Displays the total number of pages that have
been copied, printed and scanned.
„ Displays the results for fax transmissions and
receptions.
„ Prints the machine settings, lists and reports
related to fax.
For details, refer to “Checking the Machine Status
and Settings” on page 19.
5 Quality key Press to specify the document type to be copied and
the resolution.
6 Message Win-
dow „ Displays information such as the media type,
copy density, and zoom ratio. For details, refer to
“Display Indications” on page 16.
„ Displays an error message when an error occurs.
For details on error messages, refer to “Status,
Error, and Service Messages” on page 191.
7 Keypad Enters desired number of copies. Enters fax num-
bers, E-mail addresses, and names of recipients.
8 Fax key Press to enter Fax mode. The key lights up in green
while the machine is in Scan mode. For details, refer
to the bizhub C10 Facsimile User's Guide.
9 Scan key Press to enter scan mode. (Scan to E-mail or Scan
to PC) The key lights up in green while the machine
is in Scan mode. For details on the Scanner func-
tions, refer to chapter 7, “Using the Scanner”
10 Copy key Press to enter Copy mode. The key lights up in
green while the machine is in Copy mode. For
details on the Copy functions, refer to chapter 6,
“Using the Copier”.
11 2in1 key Press to specify 2in1 copying.
12 Collate key Press to specify collated copying.
No. Name Function